PENGEMBANGAN MEDIA AUGMENTED REALITY BERBASIS ANDROID UNTUK MATERI GAMBAR POTONGAN PADA GAMBAR TEKNIK MESIN
DOI:
https://doi.org/10.51878/vocational.v7i1.16284Keywords:
Augmented Reality, Media Pembelajaran, Gambar Potongan, ADDIE, Sekolah Menengah KejuruanAbstract
Tenth-grade students of the Mechanical Drawing Design program at a state vocational high school in Bekasi, Indonesia, had difficulty understanding sectional views; 15 of 26 students scored below the minimum mastery criterion of 75. This study aimed to develop an Android-based augmented reality learning medium for sectional views and to test its feasibility. The study followed a research and development design using the ADDIE model (Analyze, Design, Development, Implementation, Evaluation). The markerless application was built with Blender, Canva, Unity, and Vuforia. Feasibility was assessed with Likert-scale questionnaires completed by one subject-matter expert, one media expert, three students in a readability test, and 26 students in a field trial, and the data were analysed descriptively. The subject-matter expert gave a score of 95%, the media expert 92.5%, the readability test 92%, and the field trial 88.1%, all within the very feasible category. In the field trial, the lowest item score concerned the support of three-dimensional views for understanding concepts (85.4%) and the highest concerned the match between practice questions and content (90.8%). The medium is feasible as a supporting tool for teaching sectional views in vocational high schools.
Downloads
References
Ahmad, Z., Ahmad, H., & Rahman, Z. A. (2022). Penggunaan media pembelajaran augmented reality berbantuan Assemblr Edu untuk meningkatkan hasil belajar siswa SMA Negeri 5 Kota Ternate. Jurnal Ilmiah Wahana Pendidikan, 8(23), 514–521. https://doi.org/10.5281/zenodo.7421774
Akçay?r, M., & Akçay?r, G. (2017). Advantages and challenges associated with augmented reality for education: A systematic review of the literature. Educational Research Review, 20, 1–11. https://doi.org/10.1016/j.edurev.2016.11.002
Akku?, ?., & Yüksel Arslan, P. (2022). The effects of augmented reality in the technical drawing course on engineering students' spatial ability and academic achievement. Journal of Learning and Teaching in Digital Age, 7(2), 160–174. https://doi.org/10.53850/joltida.1020075
Baltac?, ?., & Çetin, S. (2022). The effect of augmented reality on achievement and spatial visualization skills in technical drawing course. Journal of Learning and Teaching in Digital Age, 7(2), 250–259. https://doi.org/10.53850/joltida.1047477
Febrianti, F. A. (2021). Pengembangan digital book berbasis Flip PDF Professional untuk meningkatkan kemampuan literasi sains siswa. Caruban: Jurnal Ilmiah Ilmu Pendidikan Dasar, 4(2), 102–115. https://doi.org/10.33603/caruban.v4i2.5354
Garzón, J., & Acevedo, J. (2019). Meta-analysis of the impact of augmented reality on students' learning gains. Educational Research Review, 27, 244–260. https://doi.org/10.1016/j.edurev.2019.04.001
Garzón, J., Pavón, J., & Baldiris, S. (2019). Systematic review and meta-analysis of augmented reality in educational settings. Virtual Reality, 23(4), 447–459. https://doi.org/10.1007/s10055-019-00379-9
Hikmah, N., Kuswidyanarko, A., & Lubis, P. H. M. (2022). Pengembangan media pop-up book pada materi siklus air di kelas V SD Negeri 04 Puding Besar. Jurnal PGSD: Jurnal Ilmiah Pendidikan Guru Sekolah Dasar, 15(2), 137–148. https://doi.org/10.33369/pgsd.15.2.137-148
Ibáñez, M. B., & Delgado-Kloos, C. (2018). Augmented reality for STEM learning: A systematic review. Computers & Education, 123, 109–123. https://doi.org/10.1016/j.compedu.2018.05.002
Indriyani, T. W., & Suryanto, A. (2021). Markerless augmented reality (AR) pada media pembelajaran pengenalan komponen transmisi manual mobil. Edu Komputika Journal, 8(1), 57–67. https://doi.org/10.15294/edukomputika.v8i1.44484
Mizian, Z., Sofyan, S., & Saharrudin, S. (2025). Development of a learning module to interpret engineering drawings using augmented reality (AR) for vocational high school students. Al-Ishlah: Jurnal Pendidikan, 17(2), 3352–3367. https://doi.org/10.35445/alishlah.v17i2.7217
Putri, I. T., Aminoto, T., & Pujaningsih, F. B. (2020). Pengembangan e-modul fisika berbasis pendekatan saintifik pada materi teori kinetik gas. EduFisika: Jurnal Pendidikan Fisika, 5(01), 52–62. https://doi.org/10.22437/edufisika.v5i01.7725
Radu, I. (2014). Augmented reality in education: A meta-review and cross-media analysis. Personal and Ubiquitous Computing, 18(6), 1533–1543. https://doi.org/10.1007/s00779-013-0747-y
Raharjo, N. E., & Pitaloka, G. K. (2020). Pengembangan media pelajaran berbasis aplikasi Android dengan augmented reality untuk mata pelajaran gambar teknik kelas X konstruksi gedung, sanitasi dan perawatan di SMK Negeri 1 Seyegan. Jurnal Pendidikan Teknik Sipil, 2(1), 65–77. https://doi.org/10.21831/jpts.v2i1.31966
Rejeki, R., Adnan, M. F., & Siregar, P. S. (2020). Pemanfaatan media pembelajaran pada pembelajaran tematik terpadu di sekolah dasar. Jurnal Basicedu, 4(2), 337–343. https://doi.org/10.31004/basicedu.v4i2.351
Saca, A. (2021). Penerapan marker-based augmented reality sebagai media pembelajaran tata surya. JIKA (Jurnal Informatika), 5(1), 33. https://doi.org/10.31000/jika.v5i1.3560
Sugiyono. (2020). Metode penelitian kuantitatif, kualitatif, dan R&D. Alfabeta.
Waruwu, M. (2024). Metode penelitian dan pengembangan (R&D): Konsep, jenis, tahapan dan kelebihan. Jurnal Ilmiah Profesi Pendidikan, 9(2), 1220–1230. https://doi.org/10.29303/jipp.v9i2.2141
Wu, H.-K., Lee, S. W.-Y., Chang, H.-Y., & Liang, J.-C. (2013). Current status, opportunities and challenges of augmented reality in education. Computers & Education, 62, 41–49. https://doi.org/10.1016/j.compedu.2012.10.024
